溶接金属の凝固組織に及ぼす凝固速度の影響
高温学会誌,
1-2(1975),160-168.
査読付論文
1 荒田吉明,松田福久,中田一博
4 松田福久,中田一博,西尾安宏,塚本建次,成願茂利
Al-Zn-Mg3元素系合金の溶接凝固割れ感受性に及ぼすジルコニウムの影響
溶接学会論文集,
4-1(1986),115-120.
5 松田福久,中田一博,塚本建次,成願茂利
ジルコニウムを添加したAl-Zn-Mg3元素合金の溶接凝固割れ感受性に及ぼす磁気攪拌の効果
溶接学会論文集,
4-1(1986),120-125.
10 F.Matsuda, K.Nakata, S.Shimizu
Surface Alloying of Aluminum Using Plasma Transfered Arc Welding with Powder Addition
Welding International-1991
17 山本英幸、原田章二、上山智之、小川俊一、松田福久、中田一博
低周波パルスミグ溶接法によるAl合金溶接金属の結晶粒微細化と凝固割れ感受性の改善
軽金属溶接構造協会誌
31-2(1993),64-72.
18 松田福久、中田一博、朴成斗、橋本武典
プラズマアーク粉体肉盛法によるアルミニウム合金表面へのシリコン合金化層の形成とその耐摩耗性の改善
高温学会誌,
19-4(1993),168-178.
20 H.Yamamoto, S.Harada, T.Ueyama, S.Ogawa, F.Matsuda, K.Nakata
Beneficial Effects of Low-Frequency Pulsed MIG Welding on Grain Refinement of Weld Metal and Improvement of Solidification Crack Susceptibility of Aluminum Alloys
Welding International,
7-6(1993),456-461.
23 中田一博、松田福久、成願茂利、原田章二、上山智之
Zr添加試作Al-高Mg溶接ワイヤと低周波パルスミグ溶接法の併用によるAl-Zn-Mg3元系合金の溶接凝固割れ感受性の改善
溶接学会論文集,
12-1(1994),108-114.
24 山本英幸、原田章二、上山智之、小川俊一、松田福久、中田一博
低周波パルスミグ溶接法によるAlおよびその合金の溶接部に発生する気孔の抑制効果
溶接学会論文集,
12-1(1994),64-69.
26 K.Nakata, F.Matsuda, S.Jogan, S.Harada, T.Ueyama
Improvement of Weld Solidification Crack Susceptibility of AL-Zn-Mg Ternary Alloy by Low-frequency Pulsed GMA(MIG) Welding with Trial-manufactured Zr-added Al-high-Mg Welding Wire
Welding International,
8-9(1994),690-696.
31 松田福久、中田一博、徐昌済、橋本武典
プラズマアーク粉体アロイング法によるAl合金表面へのTiC粒子アロイング層の形成条件の検討
溶接学会論文集,
13-3(1995),395-403.
32 K.Nakata, F.Matsuda
Ductility Characteristics of Commercial Aluminum Alloys between Liquidus and Solidus Temperatures during Welding and Evaluation of Weld Solidification Cracking Susceptibility
Welding International,
9-9(1995),706-716.
34 HWAS.Park and Kazuhiro Nakata
Surface Melting and Alloying Process for Surface Hardening of Aluminum Alloys
J.The Korean Welding Society,
14-2(1996),10-18.
35 HWAS.Park, Kang Zhisin and Kazuhiro Nakata
Surface Modification of Iron-Alloy Steels by Plasma Nitriding Process
J.The Korean Welding Society,
14-2(1996),1-9.
37 小久保貞男,榎本正敏,安部慎哉,中田一博
アルミニウム合金急冷凝固粉末を溶射した6063アルミニウム合金押出材のNd-YAGレーザによる表面改質
軽金属,
47-1(1997),21-27.
38 Kazuhiro Nakata and Mitsutaka Ushiroda
Al-rich Hard Coatings on Al Alloy by Low Pressure Plasma Spraying
Surface Engineering,
13(1997),45-50.(West Japan Railway Company)
39 Kiyoshi Nogi, Yoshihiro Aoki,Hidetoshi Fujii, Kazuhiro Nakata and Shoichiro Kaihara(Ishikawajima-HarimaHeavy Industries Co.,Ltd.)
Weld Formation in Microgravity
ISIJ International,
38(1998),163-170.
40 K.Nogi, Y.Aoki, H.Fujii and K.Nakata
Behavior of Bubbles in Weld under Microgravity
Acta mater.,
46-12(1998),4405-4413.
42 Heung-IlPark, Kazuhiro Nakata, and Shogo Tomida(Toyama Industrial Technology Center)
In Situ Formation of TiC Particulate Composite Layer on Cast Iron by Laser Alloying of Thermal Sprayed Titanium Coating
Journal of Materials Science,
35-3(2000),747-755.
43 Kazuhiro Nakata, Young GonKim, Masao Ushio, Shigetoshi Jyogan(Showa AluminumCorp.), and Takenori Hashimoto(Showa AluminumCorp.)
Weldability of High Strength Aluminum Alloy by Friction Stir Welding
ISIJ International,
40-Supplement(2000),S15-S19.
47 Kazuhiro NAKATA, Masao USHIO
Wear Resistance of Plasma Sprayed Al-Si Binary Alloy Coatings on A6063 Al Alloy Substrate
Surface & Coatings Technology,
142-144(2001),277-282.
48 SeigoTOMIDA, Kazuhiro NAKATA, S.SAJI, T.KUBO
Formation of Metal Matrix Composite Layeron Aluminum Alloy with TiC-CuPowder by Laser Alloying Process
Surface & Coatings Technology,
142-144(2001),585-589.
50 上山智之,仝紅軍,矢澤一蔵,中田一博,牛尾誠夫
レーザ・ACパルスミグアークハイブリッド溶接法による薄板アルミニウム合金への適用
レーザ加工学会誌
10-2(2003),151-157.
51 M.Tsukamoto, K.Murai, M.Tanaka, N.Abe, K.Nakata, and M.Ushio
Pulsed Laser Irradiation for Triggered Discharge in Arc Welding System
Review of Laser Engineering,
31(2003),286-288.
52 Kazuhiro Nakata, Masao Ushio
Effect of Fe Content on Wear Resistance of Thermal-Sprayed Al-17Si-XFe Alloy Coating on A6063 Al Alloy Substrate
Surface & Coatings Technology,
169-170(2003),443-446.
53 Shogo Tomida, Kazuhiro Nakata, S.Shibata, I.Zenkouji, S.Saji
Improvement in Wear Resistance of Hyper-Eutectic Al-Si Cast Alloy by Laser Surface Remelting
Surface & Coatings Technology,
169-170(2003),468-471.
54 SusumuUozato, Kazuhiro Nakata, Masao Ushio
Corrosion and Wear Behaviors of Ferrous Powder Thermal Spray Coatings on Aluminum Alloy
Surface & Coatings Technology,
169-170(2003),691-694.
55 Kazuhiro Nakata, Wataru Yamauchi, Katsuya Akamatsu, Masao Ushio
Plasma Niriding Behavior of Low carbon Binary Alloy Steels
Surface & Coatings Technology,
173-174(2003),1206-1210.
56 Syogo Tomida, Kazuhiro Nakata
Fe-Al Composite Layers on Aluminum Alloy Formed by laser Surface Alloying with Iron Powder
Surface & Coatings Technology,
174-175(2003),559-563.
57 Kazuhiro Nakata, Shogo Inoki, Yositaka Nagano, Masao Ushio
Friction Stir Welding of Al2O3 Particulate 6061 Al Alloy Composite
Materials Science Forum,
426-432(2003),2873-2878.
58 Hongjun Tong, Tomoyuki Ueyama, Kazuhiro Nakata, Masao Ushio
High Speed Welding of Aluminum Alloy Sheet Using Laser Assisted Alternating Current Pulsed Metal Inert Gas Process
Science and Technology of Welding and Joining,
8-3(2003),229-234.
59 Taichi Murakami, Kazuhiro Nakata, T.Ikeda, Hideo Nakajima, Masao Ushio
Weld Fusion Property of Lotus-type Porous Copper by Laser Beam Irradiation
Materials Science and Engineering,
A357-9(2003),134-140.
60 Taichi Murakami, Kazuhiro Nakata, Hongjun Tong, Masao Ushio
Dissimilar Metal Joining of Aluminum to Steel by MIG Arc Brazing Using Flux Cored Wire
ISIJ International,
43-10(2003),1596-1602.
61 上山智之,仝紅軍,矢澤一蔵,平見正行,木原貴之,中田一博,牛尾誠夫
レーザ・ACパルスミグアークハイブリッド溶接法の薄板アルミニウム合金への適用
軽金属溶接,
41-12(2003),567-575.
62 Takashi Makishi, Kazuhiro Nakata
Surface Hardening of Nickel Alloys by Meansof Plasma Nitriding
Metallurgical and Materials Transactions A,
35A(2004),227-238.
63 仝紅軍,上山智之,木原貴之,中田一博,牛尾誠夫
レーザ・交流パルスミグハイブリッド溶接法による薄板アルミニウム合金溶接の高速化
溶接学会論文集,
22-1(2004),27-36.
64 Hwa Soon Park, Takahiro Kimura, Taichi Murakami, Yoshitak aNagano, Kazuhiro Nakata and Masao Ushio
Microstructures and Mechanical Properties of Friction Stir Welds of 60%Cu-40%Zn Copper Alloy
Materials Science and Engineering,
A371-Issues1-2(2004),160-169.
65 M.Tsukamoto, K.Murai, M.Tanaka, N.Abe, K.Nakata and M.Ushio
Plasma Channel Formation for Triggering Arc Welding
Science and Technology of Welding and Joining,
9-2(2004),173-175.
67 仝紅軍,中田一博,田中学,三田常夫,牛尾誠夫
交流パルスミグ溶接法によるAl-Mg合金の溶接ヒューム抑制機構に関する研究
溶接学会論文集,
22-3(2004),375-388.
68 塚本雅裕,村井健介,田中学,茅原崇,阿部信行,中田一博,牛尾誠夫
アーク溶接システムにおける放電誘発のためのパルスレーザフォーカシング
溶接学会論文集,
23-2(2005),265-269.
69 Susumu Uozato, Kazuhiro Nakata, Masao Ushio
Evaluation of Ferrous Powder Thermal Spray Coatings on Diesel Engine Cylinder Bores
Surface & Coatings Technology,
200(2005),2580-2586.
70 上山智之,大縄登史男,田中学,中田一博
タンデムパルスGMA溶接による薄鋼板の高速溶接ビード形成に及ぼす2ワイヤ配置の影響
溶接学会論文集,
23-3(2005),383-391.
74 Takuya Tsumura, Taichi Murakami, Soong-KeunHyun, Hideo Nakajima and Kazuhiro Nakata
Analysis of Laser Fusion Zone of Lotus-type Porous Metals by 3-dimensional FEM
Materials Science Forum,
502(2005),499-504.
75 Tomoyuki Ueyama, Toshio Ohnawa, Manabu Tanaka and Kazuhiro Nakata
Effects of Torch Configuration and Welding Current on Weld Bead Formation in High Speed Tandem Pulsed Gas Metal Arc Welding of Steel Sheets
Sci.&Tech.Welding & Joining,
10-6(2005),750-759.
76 Kazuhiro Nakata
Friction Stir Welding of Copper and Copper Alloys
Welding International,
19-12(2005),929-933.
77 Hidetoshi FUJII, Young GonKIM, Takuya TSUMURA, Toru KOMAZAKI and Kazuhiro NAKATA
Estimation of Material Flow in Stir Zone during Friction Stir Welding by Distribution Measurement of Si Particles
Materials Transactions,
47-1(2006),224-232.
78 Hidetoshi FUJII, Rintaro UEJI,Yutaka TAKADA, Hiromoto KITAHARA, Nobuhiro TSUJI, Kazuhiro NAKATA and Kiyoshi NOGI
Friction Stir Welding of Ultrafine Grained Interstitial Free Steels
Materials Transactions,
47-1(2006),239-242.
79 M.Mochizuki, M.Inuzuka, H.Nishida, K.Nakata, M.Toyoda
Fracture Toughness of Structural Aluminium Alloy Thick Plate Joints by Friction Stir Welding
Science and Technology of Welding and Joining
(2006),366-370.
80 田代真一,田中学,中田一博,輿石房樹,鈴木啓一,山崎圭
Ar-He混合ガスタングステンアークにおける熱輸送特性の数値シミュレーション 高温学会誌
32-1(2006),69-73.
81 Young GonKIM, Hidetoshi FUJII, Takuya TSUMURA, Toru KOMAZAKI and Kazuhiro NAKATA
Three Defect Types in Friction Stir Welding of Aluminum Die Casting Alloy
Materials Science and Engineering A,
415(2006),250-254.
83 田代真一,田中学,中田一博,岩尾徹,輿石房樹,鈴木啓一,山崎圭
金属蒸気混入時のヘリウムガスタングステンアークのプラズマ特性
溶接学会論文集,
24-2(2006),143-148.
84 Fuxing Ye, Akira Ohmori, Takuya Tsumura and Kazuhiro Nakata
Electron-Holes Behaviors in TiO2-Fe3O4 Coating Deposited by Plasma Spraying for Environmental Application
Smart Processing Technology,
1(2006),53-56.
85 K.Nakata, Y.G.Kim, H.Fujii, T.Tsumura, T.Komazaki
Improvement of Mechanical Properties of Aluminum Die Casting Alloy by Multi-pass Friction Stir Processing
Materials Science and Engineering A,
437(2006),274-280.
86 Fuxing Ye, Hidetoshi Fujii, Takuya Tsumura, Kazuhiro Nakata
Friction Stir Welding of Inconel Alloy 600
Journal of Materials Science,
41-16(2006),5376-5379.
87 Hidetoshi Fujii, Ling Cui, Nobuhiro Tsuji, Masakatsu Maeda, Kazuhiro Nakata and Kiyoshi Nogi
Friction Stir Welding of Carbon Steels
Materials Science and Engineering A,
429(2006),50-57.
89 Takuya Tsumura, Taichi Murakami, Hideo Nakajima,Kazuhiro Nakata
Numerical Simulation of Laser Fusion Zone Profile of Lotus-type Porous Metals Materials Transactions,
47-9(2006),2248-2253.
90 Hiroyasu Yanagino, Takuya Tsumura, Hideo Nakajima, Soong-KeunHyun, Kazuhiro Nakata
Laser Welding of Lotus-type Porous Iron
Materials Transactions,
47-9(2006),2254-2258.
92 川口勲,塚本進,荒金吾郎,中田一博
深溶込みレーザ溶接におけるポロシティの発生機構-大出力CO2レーザ溶接におけるポロシティ抑制に関する研究-
溶接学会論文集,
24-4(2006),338-343.
93 Y.G.Kim, H.Fujii, T.Tsumura, T.Komazaki, K.Nakata
Effect of Welding Parameters on Microstructure in the Stir Zone of FSW Joints of Aluminum Die Casting Alloy
Materials Letters,
60-29-30(2006),3830-3837.
94 Takuya Tsumura, Fuxing YE, Taichi Murakami, Hideo Nakajima and Kazuhiro Nakata
Prediction of Laser Fusion Zone Profile of Lotus-type Porous Metals by 3D Heat Transfer Analysis
Solid State Phenomena,
127(2007),307-312.
95 Ling Cui, Hidetoshi Fujii, Nobuhiro Tsuji, Kazuhiro Nakata, Kiyoshi Nogi,Rinsei Ikeda and Muneo Matsushita
Transformation in Stir Zone of Friction Stir Welded Carbon Steels with Different Carbon Contents
ISIJ International,
47-2(2007),299-306.
97 Kazuhiro Nakata, MasahiroUmehara, Takuya Tsumura
Excimer Laser Ablation of Sintered Hydroxyapatite
Surface & Coatings Technology,
201(2007),4943-4947.
98 Zhixin Kang, Kazuhiro Nakata, Yuanyuan Li
Hard Thick-film and Wear Resistance of Al-50Si-10M Ternary Alloys on A6063 Aluminum Alloy Coated by Low Pressure Plasma Spraying
Surface & Coatings Technology,
201(2007),4999-5002.
99 S.Adachi, K.Nakata
Improvement of Adhesive Strength of Ti-AlPlasma Sprayed Coating
Surface & Coatings Technology,
201(2007),5617-5620.
101 Masato Tsujikawa,Shin-ichiroAdachi,Yukiko Abe,Sachio Oki,Kazuhiro Nakata,Masaichiro Kamita
Corrosion Protection of Mg-Li Alloy by Plasma Thermal Spraying of Aluminum
PLASMA PROCESSES & POLYMERS,
4-3(2007),593-596.
102 Masatoshi Enomoto,Sadao Kokubo,Kazuhiro Nakata
Surface Treatment of Aluminum Alloy with Laser Irradiation to Increase Wear Resistance
Materials Science Forum,
539-543(2007),404-410.
103 Shinichi Tashiro, Manabu Tanaka, Kazuhiro Nakata, Toru Iwao, Fusaki Koshiishi, Keiichi Suzuki and Kei Yamazaki
Plasma Properties of Helium Gas Tungsten Arc with Metal Vapour
Sci.& Tech.Welding & Joining,
12-3(2007),202-207.
104 Taichi Murakami, Takuya Tsumura,Teruyuki Ikeda, Hideo Nakajima, and Kazuhiro Nakata
Anisotropic Fusion Profile and Joint Strength of Lotus-type Porous Magnesium by Laser Welding
Materials Science and Engineering A,
456-1-2(2007),278-285.
105 Shinichiro Adachi,Kazuhiro Nakata
Study of Bonding Strength of Plasma-Sprayed Ti-Al Coating on Mild Steel Substrate
PLASMA PROCESSES & POLYMERS,
4-S1(2007),S512-S515.
106 T.Ueyama, T.Ohnawa, M.Tanaka, K.Nakata
Occurrence of Arc Interaction in Tandem Pulsed Gas Metal Arc Welding
Science and Technology of Welding and Joining,
12-6(2007),523-529.
107 川口勲,塚本進,荒金吾郎,中田一博
出力変調溶接によるポロシティの抑制-大出力CO2レーザー溶接におけるポロシティ抑制に関する研究(第3報)-
溶接学会論文集,
25-2(2007),328-335.
108 D.V.Luzgin, G.Xie, T.Tsumura, K.Nakata, Y.Murakami, H.M.Kimura, A.Inoue
The Structure of the Welded Zone and Phase Transformation Behavior of Ni-based Bulk-glass Forming Alloy
Characterization and Control of Interfaces
for High Quality Advanced Materials II:Ceramic Transactions,
198(2007),3-8.
109 Hidetoshi Fujii, Hideaki Kato, Kazuhiro Nakata and Kiyoshi Nogi
Mechanical Properties of Friction-Stir Welded Titanium Joint
Characterization and Control of Interfaces
for High Quality Advanced Materials II:Ceramic Transactions,
198(2007),51-56.
110 Hyun-GuenKim, Kazuhiro Nakata, Takuya Tsumura, Masahiro Sugiyama,Takanori Igarashi,Masahiro Fukumoto,Hisamichi Kimura,Akihisa Inoue
Properties of Metallic Glass Coatings on an Aluminum Alloy Substrate Produced Using a HVOF Spraying Process
Characterization and Control of Interfaces
for High Quality Advanced Materials II:Ceramic Transactions,
198(2007),69-77.
111 Takuya Tsumura, Katsunori Kobayashi, Kazuhiro Nakata, NatsukiYoneyama, Taichi Murakami, Hisamichi Kimura, Akihisa Inoue
Weldability and Mechanical Property of Ni53Nb20Ti10Zr8Co6Cu3 Metallic Glass Foil by Laser Welding
Characterization and Control of Interfaces
for High Quality Advanced Materials II:Ceramic Transactions,
198(2007),109-115.
112 Shinichiro Adachi, Kazuhiro Nakata
Investigation of Bonding Mechanismbetween Plasma Sprayed Al2O3 Top Coating and Ti-Al Undercoating on Steel Substrate
Characterization and Control of Interfaces
for High Quality Advanced Materials II:Ceramic Transactions,
198(2007),369-374.
113 Masato Tsujikawa, Shin-ichiro Adachi, Kazuhiro Nakata, Masaichiro Kamita, Sachio Oki
Plasma Thermal Deposition of Aluminumon Mg-Li Work-Hardened Alloy
Characterization and Control of Interfaces
for High Quality Advanced Materials II:Ceramic Transactions,
198(2007),453-459.
114 山本健太郎,田中学,田代真一,中田一博,山崎圭,山本恵理,鈴木啓一
数値計算シミュレーションによるガスタングステンアーク溶接の金属蒸気挙動解析溶接学会論文集,
25-3(2007),443-449. 論文(PDF)
115 Masahiro Yoshimura, Takamasa Onoki, Mikio Fukuhara, Xinmin Wang, Kazuhiro Nakata, Toshio Kuroda
Formation of Growing Integrated Layer(GIL)between Ceramics and Metallic Materials for Improved Adhesion Performance
Materials Science and Engineering B,
148(2007),2-6.
117 M.Tsujikawa, S.Noguchi, N.Yamauchi, N.Ueda, T.Sone, K.Nakata
Surface Layer Hardness of Austenitic Stainless Steel via Low Temperature Plasma Carburizing and/or Nitriding
Materials Science Forum,
561-565(2007),2477-2480.
118 Fuxing YE, Akira OHMORI, Kazuhiro Nakata, Takuya Tsumura
Structures and Photocatalytic Performance of TiO2-FeTiO3 Coatings Prepared by Plasma Spraying Technique
高温学会誌
33-6(2007),300-305.
119 金鉉根,本江克次,中島浩二,五十嵐貴教,中田一博,橋本昌宏,木村久道,井上明久
High Velocity Oxy-Fuel溶射法によりアルミニウム合金基材に成膜したFe基金属ガラス皮膜の摩耗挙動粉体および粉末冶金,
54-11(2007),790-794.
120 Y.C.Chen, K.Nakata
Friction Stir Lap Joining Aluminum and Magnesium Alloys
Scripta Materialia,
58(2007),433-436.
121 F.-X.Ye, A.Ohmori, T.Tsumura, K.Nakata, C.-J.Li
Microstructural Analysis and Photocatalytic Activity of Plasma-Sprayed Titania-Hydroxyapatite Coatings
Journal of Thermal Spray Technology,
16-5-6(2007),776-782.
122 Y.C.Chen, T.Komazaki, T.Tsumura, K.Nakata
Role of Zinc Coat in Friction Stir Lap Welding Al and Zinc Coated Steel
Materials Science and Technology,
24-1(2008),33-39.
123 F.X.Ye, T.Tsumura, K.Nakata, A.Ohmori
Dependence of Photocatalytic Activity on the Compositions and Photo-absorption of Functional TiO2-Fe3O4 Coatings Deposited by Plasma Spray
Materials Science and Engineering B,
148(2008),154-161.
124 Yousuke Kawahito,Takeshi Terajima,Hisamich Kimura,Toshio Kuroda, Kazuhiro Nakata,Seiji Katayama and Akihisa Inoue
High-power Fiber Laser Welding and its Application to Metallic Glass Zr55Al10Ni5Cu30
Materials Science and Engineering B,
148-1-3(2008),105-109.
125 Takeshi Terajima, Kazuhiro Nakata, Yuji Matsumoto,Wei Zhang, Hisamichi Kimura and Akihisa Inoue
Brazing of Cu with Pd-based Metallic Glass Filler
Materials Science and Engineering B,
148-1-3(2008),128-138.
126 D.V.Louzguine-Luzgin, G.Q.Xie, T.Tsumura, H.Fukuda, K.Nakata, H.M.Kimura, A.inoue
Structural Investigation of Ni-Nb-Ti-Zr-Co-Cu Glassy Samples Prepared by Different Welding Techniques
Materials Science and Engineering B,
148-1-3(2008),88-91.
127 Fuxing YE, Akira OHMORI, Takuya Tsumura, Kazuhiro Nakata
Influence of Fe TiO3 Addition on TiO2 Coating Formation Characteristics in Plasma Spray
Plasma Application and Hybrid Functionally Materials,
17(2008),118-119.
128 Yoshihisa Sechi,Akio Takezaki,Takuya Tsumura and Kazuhiro Nakata
Dissimilar Laser Brazing of Boron Nitride and Tungsten Carbide
Smart Processing Technology,
2(2008),27-32.
129 Shinichiro Adachi and Kazuhiro Nakata
Corrosion Behavior of Plasma Sprayed Al2O3/Ti-Al Coating on Steel Substrate
Smart Processing Technology,
2(2008),49-52.
130 Takeshi Terajima, Kazuhiro Nakata, Yuji Matsumoto, Wei Zhang, Hisamichi Kimura and Akihisa Inoue
Effect of Cooling Rate on Brazing Cu with Pd40Cu30Ni10P20 Filler
Smart Processing Technology,
2(2008),195-198.
131 Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata, Keiichi Suzuki, AnthonyB.MurphyandJohnJ.Lowke
Effect of Metal Vapor on Thermal Plasma in Gas Tungsten Arc Welding
Smart Processing Technology,
2(2008),207-210.
132 Takanori SUZUKI andKazuhiro Nakata
Laser Brazing of Zinc-Coated Steel and Al Alloy by Ag Alloy Filler Metal
Smart Processing Technology,
2(2008),277-280.
134 Y.C.Chen, T.Komazaki, Y.G.Kim, T.Tsumura, K.Nakata
Interface Microstructure Study of Friction Stir Lap Joint of AC4C Cast Aluminum Alloy and Zinc-coated Steel
Materials Chemistry and Physics,
No.111(2008),375-380.
135 YAMAMOTO Kentaro, TANAKA Manabu, TASHIRO Shinichi, NAKATA Kazuhiro, SUZUKI Keiichi,YAMAZAKI Kei
Numerical Modeling of Welding Arc with Complex System between Arc Plasma and Molten Electrode
Materials Science Forum,
580-582(2008),311-314.
136 Kazuhiro Nakata, Hirohisa Ikegami, Takuya Tsumura
Effect of Probe Thread on Friction Spot Joint Strength of AZ31 Mg Alloy
Materials Science Forum,
580-582(2008),351-354.
137 Y.C.Chen, T.Komazaki, Y.G.Kim, T.Tsumura, K.Nakata
Friction Stir Lap Joining of AC4C Cast Aluminum Alloy and Zinc-coated Steel
Materials Science Forum,
580-582(2008),371-374.
138 Hidetoshi Fujii, TakahiroTatsuno, Takuya Tsumura, Manabu Tanaka, Kazuhiro Nakata
Hybrid Friction Stir Welding of Carbon Steel
Materials Science Forum,
580-582(2008),393-396.
139 Hwa Soon Park, Byung WooLee, Taichi Murakami, Kazuhiro Nakata, Masao Ushio
Friction Stir Welding of Oxygen Free Copper and 60%Cu-40%Zn Copper Alloy
Materials Science Forum,
580-582(2008),447-450.
140 Hyun-guenKim, Kazuhiro Nakata, Takuya Tsumura, Masaharu Sugiyama, Takanori Igarashi, Masahiro Fukumoto, Hisamichi Kimura, Akihisa Inoue
Effect of Particle Size Distribution of the Feedstock Powder on the Microstructure of Bulk Metallic Glass Sprayed Coating by HVOF on Aluminum Alloy Substrate
Materials Science Forum,
580-582(2008),467-470.
141 Shinichiro Adachi,Kazuhiro Nakata
Effect of Plasma Spraying Parameters on Anisotropic Feature of the Mechanical Property of Plasma Sprayed Al2O3 Coating
Materials Science Forum,
580-582(2008),471-474.
142 Yuji Sakai, Kazuhiro Nakata, Takuya Tsumura, Mitsuji Ueda, Tomoyuki Ueyama, Kastuya Akamatsu
Fiber Laser Welding of Noncombustible Magnesium Alloy
Materials Science Forum,
580-582(2008),479-482.
143 M.Tsujikawa, M.Egawa, N.Ueda, A.Okamoto, T.Sone, K.Nakata
Effect of Molybdenum and Copper on S-phase Layer Thickness of Low-temperature Carburized Austenitic Stainless Steel
Surface & Coatings Technology,
202(2008),5488-5492.
145 Y.C.Chen, K.Nakata
Effect of the Surface State of Steel on the Microstructure and Mechanical Properties of Dissimilar Metal Lap Joints of Aluminum and Steel by Friction Stir Welding
Metallurgical and Materials Transactions A,
39A(2008),1985-1992.
146 山崎圭,山本恵理,鈴木啓一,輿石房樹,和木謙治,田代真一,田中学,中田一博
赤外線二色放射測温法によるGMA溶接の溶滴温度測定 溶接学会論文集,
26-3(2008),214-219.
147 Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata and Anthony B.Murphy
Numerical Analysis of Weld Penetration Geometry during Gas Tungsten Arc Welding Considering Influence of Metal Vapor Mixture
Transactions of the Materials Research Society of Japan,
33-3(2008),703-706.
148 M.Tanaka, T.Tamaki, S.Tashiro, K.Nakata, T.Ohnawa and T.Ueyama
Characteristics of Ionized Gas Metal Arc Processing
Surface & Coatings Tech.,
202(2008),5251-5254.
149 K.Yamamoto, M.Tanaka, S.Tashiro, K.Nakata, K.Yamazaki, E.Yamamoto, K.Suzuki and A.B.Murphy
Numerical Simulation of Metal Vapor Behaviorin Arc Plasma
Surface & Coatings Tech.,
202(2008),5302-5305.
150 K.Yamamoto, M.Tanaka, S.Tashiro, K.Nakata, K.Yamazaki, E.Yamamoto, K.Suzuki and A.B.Murphy
Metal Vapour Behaviour in Thermal Plasma of Gas Tungsten Arcs during Welding
Sci.& Tech.Welding & Joining,
13-6(2008),566-572.
151 Hidetoshi Fujii, Ling Cui, Kazuhiro Nakata and Kiyoshi Nogi
Mechanical Properties of Friction Stir Welded Carbon Steel Joints-Friction Stir Welding with and without Transformation
Welding in the World,
52-9/10(2008),75-81.
152 M.Tanaka, K.Yamamoto, S.Tashiro, K.Nakata, M.Ushio, K.Yamazaki, E.Yamamoto, K.Suzuki, A.B.Murphy and J.J.Lowke
Metal Vapour Behaviour in Gas Tungsten Arc Thermal Plasma during Welding
Welding in the World,
52-11/12(2008),82-88.
153 Y.C.Chen, K.Nakata
MMicrostructural Characterization and Mechanical Properties in Friction Stir Welding of Aluminum and Titanium Dissimilar Alloys
Materials & Design,
30(2009),469-474.
154 K.Murakami, H.Kanematsu, K.Nakata
Corrosion Characteristics in Concrete Environment of Hot Dip Galvanised Steel and Zn Alloy Hot Dip Coated Steel
Transactions of the Institute of Metal Finishing,
87-1(2009),23-27.
157 L.Yu, K.Nakata, N.Yamamoto, J.Liao
Texture and its Effect on Mechanical Properties in Fiber Laser Weldofa Fine-grained Mg Alloy
Materials Letters,
63(2009),870-872.
158 Kazuyuki Hokamoto, Kazuhiro Nakata, Akihisa Mori, Shota Tsuda, Takuya Tsumura, Akihisa Inoue
Dissimilar Material Welding of Rapidly Solidified Foil and Stainless Steel Plate Using Underwater Explosive Welding Technique
Journal of Alloys and Compounds,
472(2009),507-511.
159 Yingchun Chen, Kazuhiro Nakata
Friction Stir Processing of SKD61 Tool Steel
International Journal of Modern PhysicsB,
23-6(2009),1116-1121.
160 Masayuki Aonuma, Kazuhiro Nakata
Effect of Alloying Elements on Interface Microstructure of Mg-Al-Zn Magnesium Alloys and Titanium Joint by Friction Stir Welding
Materials Science and Engineering B,
161(2009),46-49.
161 Kuk Hyun Song, Hidetoshi Fujii, Kazuhiro Nakata
Evaluation of Grain Refinement and Mechanical Property on Friction Stir Welded Inconel 600
Materials Transactions,
50-4(2009),832-836.
162 Y.C.Chen, H.Fujii, T.Tsumura, Y.Kitagawa, K.Nakata, K.Ikeuchi, K.Matsubayashi, Y.Michishita, Y.Fujiya, J.Katoh
Friction Stir Processing of 316L Stainless Steel Plate
Science and Technology of Welding and Joining,
14-3(2009),197-201.
163 T.Ueyama, T.Uezono, T.Era, M.Tanaka, K.Nakata
Solution to Problems of Arc Interruption and Arc Length Controlin Tandem Pulsed Gas Metal Arc Welding
Science and Technology of Welding and Joining,
14-4(2009),605-614.
164 Lina Yu, Kazuhiro Nakata, Jinsun Liao
Microstructural Modification and Mechanical Property Improvement in Friction Stir Zone of Thixo-molded AE42 Mg Alloy
Journal of Alloys and Compounds,
480(2009),340-346.
165 Takeshi Terajima, Kazuhiro Nakata, Hisamichi Kimura and Akihisa Inoue
Development of W-Reinforced Zr-based Metallic Glass
Materials Transactions,
50-6(2009),1322-1325.
166 Y.S.Ji, H.Fujii, M.Maeda, K.Nakata, H.Kimura, A.Inoue and K.Nogi
Friction Stir Welding of Zr-based Bulk Metallic Glass
Journal of Physics:Conference Series,
165(2009),12015.
167 Yoshihisa Sechi, Akio Takezaki, Taihei Matsumoto, Takuya Tsumura, Kazuhiro Nakata
Composition Dependence of Titaniumin Silver-Copper-Titanium Alloy Braze on Dissimilar Laser Brazing of Boron Nitride Ceramics and Ceramics and Cemented Carbide
Materials Transactions,
50-6(2009),1294-1299.
168 YoungSuJi, Hidetoshi Fujii, Yufeng Sun, Masakatsu Maeda, Kazuhiro Nakata, Hisamichi Kimura, Akihisa Inoue, Kiyoshi Nogi
Friction Stir Welding of Zr55Cu30Ni5Al10 Bulk Metallic Glass
Materials Transactions,
50-6(2009),1300-1303.
169 Motoo Egawa, Yasushi Matsuda, Nobuhiro Ueda, Takumi Sone, Masato Tsujikawa, Kazuhiro Nakata
Effect of Cold Forming on Low-Temperature Plasma Nitriding and Carburizing Characteristics of Austenitic Stainless Steel
Plasma Processes and Polymers,
6(2009),S893-S896.
170 K.H.Song, H.Fujii, K.Nakata
Effect of Welding Speed on Microstructural and Mechanical Properties of Friction Stir Welded Inconel600
Materials & Design,
30(2009),3972-3978.
171 K.Yamamoto, M.Tanaka, S.Tashiro, K.Nakata and A.B.Murphy
Metal Vapor Behavior in GTA Welding of a Stainless Steel Considering the Marangoni Effect
IEEJ Trans.,
4(2009),497-503.
172 Kuk Hyun Song, Takuya Tsumura, Kazuhiro Nakata
Development of Microstructure and Mechanical Properties in Laser-FSW Hybrid Welded Inconel600
Materials Transactions,
50-7(2009),1832-1837.
173 L.Yu, K.Nakata, J.Liao
Weld Porosity in Fibre Laser Weld of Thixomolded Heat Resistant Mg Alloys
Science and Technology of Welding and Joining,
14-6(2009),554-558.
174 T.Kozuru, M.Tanaka, S.Tashiro and K.Nakata
Observation of Arc Phenomena in Plasma GMA Welding Process
溶接学会論文集,
27-2(2009),42s-44s.
175 K.Yamamoto, M.Tanaka, S.Tashiro, K.Nakata, K.Yamazaki, E.Yamamoto, K.Suzuki and A.B.Murphy
Numerical Analysis of Metal Vapor Behavior with Multi-diffusion Systemin TIG Welding of Stainless Steel
溶接学会論文集,
27-2(2009),4s-7s.
176 Shin Minhyo, NAKATA Kazuhiro
Single Pass Full Penetration Welding of High-tensile Steel Thick-plate Using 4kW Fiber Laser and MAG Arc Hybrid Welding Process
溶接学会論文集,
27-2(2009),80s-84s.
177 Yingchun Chen, Hidetoshi Fujii, Takuya Tsumura, Yoshihiko Kitagawa, Kazuhiro Nakata, KenjiIkeuchi, Kazuki Matsubayashi, Yukio Michishita, Yasuyuki Fujiya, Jungo Katoh
Effect of Tool Geometry on Tool Wear Characterization and Weld Formation in Friction Stir Welding of 316L Stainless Steel
溶接学会論文集,
27-2(2009),85s-88s.
178 Jinsun Liao, Naotsugu Yamamoto, Kazuhiro Nakata
Effect of Dispersed Intermetallic Particles on Microstructural Evolution in the Friction Stir Weld of a Fine-Grained Magnesium Alloy
Metallurgical and Materials Transactions A,
40A(2009),2212-2219.
179 Y.C.Chen, K.Nakata
Effect of Tool Geometryon Microstructure and Mechanical Properties of Friction Stir Lap Welded Magnesium Alloy and Steel
Materials & Design,
30(2009),3913-3919.
181 Yoshihisa Sechi, Takuya Tsumura, Kazuhiro Nakata
Dissimilar Laser Brazing of Boron Nitride and Tungsten Carbide
Materials & Design,
31(2009),2071-2077.
182 LinaYu, Kazuhiro Nakata, Jinsun Liao
Microstructures and Mechanical Propertiesin Friction Stir Zone of Thixo-molded AS41Mg Alloy
Materials Transactions,
50-10(2009),2378-2383.
183 KukHyun Song, Kazuhiro Nakata
Mechanical Properties of Friction-Stir-Welded Inconel 625 Alloy
Materials Transactions,
50-10(2009),2498-2501.
184 Kazuyuki Hokamoto, Kazuhiro Nakata, Akihisa Mori, Seiichiro Li, Ryuichi Tomoshige, Shota Tsuda, Takuya Tsumura, Akihisa Inoue
Microstructural Characterization of Explosively Welded Rapidly Solidified Foil and Stainless Steel Plate through the Acceleration Employing Underwater Shock Wave
Journal of Alloys and Compounds,
485(2009),817-821.
185 Y.C.Chen, K.Nakata
Friction Stir Lap Welding of Magnesium Alloy and Zinc-coated Steel
Materials Transactions,
50-11(2009),2598-2603.
186 Naotsugu Yamamoto, Jinsun Liao, Shuhei Watanabe, Kazuhiro Nakata
Effect of Intermetallic Compound Layer on Tensile Strength of Dissimilar Friction-Stir Weld of a High Strength Mg Alloy and Al Alloy
Materials Transactions,
50-12(2009),2833-2838.
187 K.Yamamoto, M.Tanaka, S.Tashiro, K.Nakata, E.Yamamoto, K.Yamazaki, K.Suzuki, A.B.Murphy and J.J.Lowke
Numerical Simulation of Diffusion of Multiple Metal Vapoursina TIG Arc Plasma for Welding of Stainless Steel
Welding in the World,
53-7/8(2009),166-170.
188 Y.F.Sun, H.Fujii, Y.Takada, N.Tsuji, K.Nakata and K.Nogi
Effect of Initial Grain Size on the Joint Properties of Friction Stir Welded Aluminum
Materials Science and Engineering A,
527(2009),317-321.
189 K.H.Song, K.Nakata
Effect of Precipitation on Post-heat-treated Inconel 625 Alloy after Friction Stir Welding
Materials & Design,
31(2009),2942-2947.
190 K.Yamazaki, E.Yamamoto, K.Suzuki, F.Koshiishi, S.Tashiro, M.Tanaka, K.Nakata
Measurement of Surface Temperature of Weld Pools by Infrared Two Colour Pyrometry
Science and Technology of Welding and Joining,
15-1(2010),40-47.
192 Y.C.Chen, K.Nakata
Effect of Surface States of Steel on Microstructure and Mechanical Properties of Lap Joints of Magnesium Alloy and Steelby Friction Stir Welding
Science and Technology of Welding and Joining,
15-4(2010),293-298.
194 H.Liu, K.Nakata, N.Yamamoto, J.Liao
Friction Stir Welding of Pure Titanium Lap Joint
Science and Technology of Welding and Joining,
15-5(2010),428-432.
195 K.H.Song,K.Nakata
Microstructural and Mechanical Properties of Friction-stir-welded and Post-heat-treated Inconel 718 Alloy
Journal of Alloys and Compounds,
505(2010),144-150.
196 Hidetoshi Fujii, Yufeng Sun, Hideaki Kato, Kazuhiro Nakata
Investigation of Welding Parameter Dependent Microstructure and Mechanical Properties in Friction Stir Welded Pure Ti Joints
Materials Science and Engineering A,
527(2010),3386-3391.
197 Y.F.Sun, Y.S.Ji, H.Fujii, K.Nakata and K.Nogi
Microstructure and Mechanical Properties of Friction Stir Welded Joint of Zr55Cu30Al10Ni5 Bulk Metallic Glass with Pure Copper
Materials Science and Engineering A,
527(2010),3427-3432.
198 Jinsun Liao, Naotsugu Yamamoto, Hong Liu, Kazuhiro Nakata
Microstructureat Friction Stir Lap Joint Interface of Pure Titanium and Steel
Materials Letters,
64(2010),2317-2320.
199 T.Terajima, K.Nakata, H.Kimura and A.Inoue
Laser Butt Welding of Mg-based Metallic Glass
Ceramic Transactions,
219(2010),55-60.
200 Takeshi Terajima, Fumiya Takeuchi, Kazuhiro Nakata, Shinichiro Adachi, Koji Nakashima, Takanori Igarashi
Composite Coating Containing WC/12Co Cermet and Fe-based Metallic Glass Deposited by High-velocity Oxygen Fuel Spraying
Journal of Alloys and Compounds,
504(2010),S288-S291.
201 Motoo Egawa, Nobuhiro Ueda, Kazuhiro Nakata, Masato Tsujikawa, Manabu Tanaka
Effect of Additive Alloying Element on Plasma Nitriding and Carburizing Behavior for Austenitic Stainless Steels
Surface & Coatings Technology,
205(2010),s246-s251.
202 Masayuki Aonuma, Kazuhiro Nakata
Effect of Calcium on Intermetallic Compound Layer at Interface of Calcium Added Magnesium-aluminum Alloy and Titanium Joint by Friction Stir Welding
Materials Science and Engineering B,
173(2010),135-138.
203 瀬知啓久、竹崎昭夫、松本大平、津村卓也、中田一博
窒化ホウ素と超硬合金の異材レーザブレ―ジングにおけるAg-Cu-Ti合金ろう材特性のTi濃度依存性
日本金属学会誌
74-10(2010),643-649.
204 Ichiro Seki, Hisamichi Kimura, Kazuhiro Nakata, Akihiso Inoue
Influence of Precipitation Behavior of Different Crystalline Phases for Embrittlement Behavior of Several Zr-Based Metallic Glasses
Materials Transactions,
51-11(2010),2033-2038.
205 HongLiu, Kazuhiro Nakata, Naotsugu Yamamoto, Jinsun Liao
Grain Orientation and Texture Evolution in Pure Titanium Lap Joint Produced by Friction Stir Welding
Materials Transactions,
51-11(2010),2063-2068.
206 M.Tanaka, K.Yamamoto, S.Tashiro, K.Nakata, E.Yamamoto, K.Yamazaki, K.Suzuki, A.B.Murphy and J.J.Lowke
Time-dependent Calculations of Molten Pool Formation and Thermal Plasma with Metal Vapourin Gas Tungsten Arc Welding
J.Phys.D:Appl.Phys.,
43(2010),434009.
207 Shinichi Tashiro, Tasuku Zeniya, Kentaro Yamamoto, Manabu Tanaka, Kazuhiro Nakata, Anthony B Murphy, Eri Yamamoto, Kei Yamazaki and Keiichi Suzuki
Numerical Analysis of Fume Formation Mechanismin Arc Welding
J.Phys.D:Appl.Phys.,
43(2010),434012.
208 田代真一, 銭谷佑, 山本健太郎, 田中学, 中田一博, BMURPHY Anthony, 山本恵理, 山崎圭, 鈴木啓一
ティグ溶接におけるヒューム生成機構の総合数値解析
溶接学会論文集,
28-4(2010),369-375.
209 Tasuku Zeniya, Shinichi Tashiro, Kentaro Yamamoto, Manabu Tanaka, Kazuhiro Nakata, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki
Numerical Simulation of Welding Fume Formation Mechanismin Gas Tungsten Arc Welding
Transactions of the Materials Research Society
ofJapan,35-4(2011),801-804.
211 Masayuki Aonuma, Kazuhiro Nakata
Dissimilar Metal Joining of 2024 and 7075 Aluminium Alloys to Titanium Alloys by Friction Stir Welding
Materials Transactions,
52-5(2011),948-952.
212 樫原一、山本幸祐、古田正昭、米谷周、津村卓也、中田一博、金相烈、鈴木進補、中嶋英雄
ロータス型ポーラス炭素鋼の工作機械移動体への適用
日本機械学会論文集(C編),
77-784(2011),4693-4703.
213 Duo Liu, Hiroyuki Nishio, Kazuhiro Nakata
Anisotropic Property of Material Arrangementin Friction Stir Welding of Dissimilar Mg Alloys
Materials & Design,
32(2011),4818-4824.
214 H.Sawato, S.Tashiro, K.Nakata, M.Tanaka, E.Yamamoto, K.Yamazaki and K.Suzuki
Measurement of Dynamic Variationin Two-dimensional Temperature Distribution of TIG Pulsed-arcs
溶接学会論文集,
29-3(2011),23s-26s.
215 T.Tsumura, H.Nakajima, K.Nakata
Numerical Simulation of Fusion Zone Shape of Lotus-type Porous Iron by Laser Welding
溶接学会論文集,
29-3(2011),53s-57s.
216 村上和美,兼松秀行,田中学,中田一博
溶融亜鉛めっき鉄筋の半自動アーク溶接時におけるシールドガスおよび電極ワイヤの影響
溶接学会論文集,
29-3(2011),139-145.
217 H.Liu, K.Nakata, N.Yamamoto, J.Liao
Mechanical Properties and Strengthening Mechanisms in Laser Beam Welds of Pure Titanium
Science and Technology of Welding and Joining,
16-7(2011),581-585.
218 申玫孝、村上孝浩、中田一博
厚鋼板のT継手の水平すみ肉溶接における1パス貫通溶接継手形成に及ぼすファイバーレーザ・マグアークハイブリッド溶接条件の検討
溶接学会論文集,
29-3(2011),174-180.
220 Y.C.Chen, H.Fujii, T.Tsumura, Y.Kitagawa, K.Nakata, K.Ikeuchi, K.Matsubayashi, Y.Michishita, Y.Fujiya, J.Katoh
Banded Structure and its Distribution in Friction Stir Processing of 316L Austenitic Stainless Steel
Journal of Nuclear Materials,
420(2011),497-500.
221 Y.Morisada, H.Fujii, Y.Kawahito, K.Nakata and M.Tanaka
Three-dimensional Visualization of Material Flowduring Friction Stir Welding by Two Pairs of X-ray Transmission Systems
Scripta Materialia,
65(2011),1085-1088.
222 H.Liu, K.Nakata, J.X.Zhang, N.Yamamoto, J.Liao
Microstructural Evolution of Fusion Zonein Laser Beam Welds of Pure Titanium
Materials Characterization,
65(2011),1-7.
223 H.Liu, K.Nakata, N.Yamamoto, J.Liao
Microstructural Characteristics and Mechanical Properties in Laser Beam Welds of Ti6Al4V Alloy
Journal of Materials Science,
47-3(2012),1460-1470.
224 Takahiro Murakami, Kazuhiro Nakata, Naotsugu Yamamoto, Jinsun Liao
Formation of One Pass Fully-penetrated Weld Bead of Titanium Plate by Fiber Laser and MIG Arc Hybrid Welding
Materials Transactions,
53-5(2012),1017-1021.
225 Kimiaki Nagatsuka, Yoshihisa Sechi,Yosinari Miyamoto, Kazuhiro Nakata
Characteristics of Dissimilar Laser-brazed Joints of Isotropic Graphite to WC-Co Alloy
Materials Science and Engineering B,
177(2012),520-523.
226 Masayuki Aonuma, Kazuhiro Nakata
Dissimilar Metal Joining of ZK60 Magnesium Alloy and Titanium by Friction Stir Welding
Materials Science and Engineering B,
177(2012),543-548.
227 Kuk Hyun Song, Kazuhiro Nakata
Investigation of Microstructure and Mechanical Properties of Friction Stir Lap Jointed Ni Base Superalloy
Materials Science Forum,
724(2012),481-485.
228 L.Zou, K.Nakata, J.Liao, T.Tsumura
Microstructural Characteristics and Mechanical Properties of Non-combustive Mg-9Al-Zn-Ca Magnesium Alloy Friction Stir Welded Joints
Materials & Design,
42(2012),505-512.
230 L.Zou, D.Liu, K.Nakata, T.Tsumura, H.Fujii, K.Ikeuchi, Y.Michishita, Y.Fujiya and M.Morimoto
New Technique of Self-refilling Friction Stir Welding to Repair Keyhole
Science and Technology of Welding and Joining,
17-8(2012),649-655.
231 K.Nagatsuka, Y.Sechi and K.Nakata
Dissimilar Laser Brazing of h-BN and WC-Co Alloy in Ar Atmosphere without Evacuation Process
Journal of Physics:Conference Series,
379(2012),012048.
232 Zhihua Song, Kazuhiro Nakata, Aiping Wu, JinsunLiao
Interfacial Microstructure and Mechanical Property of Ti6Al4V/A606l Dissimilar Joint by Direct Laser Brazing without Filler Metal and Groove
Materials Science and Engineering A,
560(2012),111-120.
233 万谷義和、津村卓也、中田一博
Ti-15Nb合金のαマルテンサイト組織形成に伴う材料特性への影響とプラズマ窒化による表面硬化処理
熱処理,
52-5(2012),263-268.
235 永塚公彬,吉田昇一郎,瀬知啓久,中田一博
Ag-Cu-Ti活性ろう材を用いたレーザブレージングによるサイアロンと超硬合金の異材接合性に及ぼすTi添加量の影響
溶接学会論文集,
31-1(2013),16-22.
236 山本尚嗣,廖金孫,村上孝浩,中田一博
チタン合金Ti-6Al-4Vのファイバーレーザ・ミグアークハイブリッド溶接性に関する基礎的検討
日本金属学会誌
77-3(2013),94-100.
237 Kuk Hyun Song, Won YongKim, Kazuhiro Nakata
Investigation of Microstructure and Mechanical Properties on Surface-Modified Inconel718 Alloy
Materials Transactions,
54-10(2013),2032-2036.
238 F.C.Liu, J.Liao, K.Nakata
Joining of Metal to Plastic Using Friction Lap Welding
Materials & Design,
54(2013),236-244.
239 F.C.Liu, M.J.Tan, J.Liao, Z.Y.Ma, Q.Meng, K.Nakata
Microstructural Evolution and Superplastic Behavior in Friction Stir Processed Mg-Li-Al-Zn Alloy
Journal of Materials Science,
48-24(2013),8539-8546.
240 Shigeki Kakiuchi, Shogo Tomida, Hideki Yamagishi, Takashi Yoneda, Kazuhiro Nakata
Hot Cracking Phenomenain Electron-beam-melted Surface Region of Co-Cr-Mo Alloy
溶接学会論文集,
31-4(2013),100s-103s.
241 Toshikazu Matsuyama, Takuya Tsumura, Kazuhiro Nakata
Novel Solid State Cladding of Brass to Steel Plate by Friction Stir Welding
溶接学会論文集,
31-4(2013),73s-77s.
242 Masayuki Aonuma, Kazuo Morikawa, Yoshikazu Teranishi, Kazuhiro Nakata
Interfacial Microstructure of CP-Ti and AZ31 Joint by Friction Stir Welding
溶接学会論文集,
31-4(2013),96s-99s.
243 菅哲男,村井康生,小橋泰三,上野邦香,進藤稔,菅野克紀,中田一博
オーステナイト系ステンレス鋼/純銅の異材レーザブレージングの検討
溶接学会論文集,
32-1(2014),38-46.
244 Jinsun Liao, Naotsugu Yamamoto, Kazuhiro Nakata
Gas Tungsten Arc Welding of Fine-grained AZ31B Magnesium Alloys Made by Powder Metallurgy
Materials & Design,
56(2014),460-467.
245 Zhihua Song, Kazuhiro Nakata, Aiping Wu, Jinsun Liao, Li Zhou
Influence of Probe Offset Distance on Interfacial Microstructure and Mechanical Properties of Friction Stir Butt Welded Joint of Ti6AL4V and A6061 Dissimilar Alloys
Materials & Design,
57(2014),269-278.
247 K.Nagatsuka, S.Yoshida, Y.Sechi, K.Nakata
Effect of Ti Content in Ag-Cu-Ti Activated Filler Metal on Dissimilar Joint Formation of Sialon and WC-Co Alloy by Laser Brazing
Science and Technology of Welding and Joining,
19-6(2014),521-526.
248 Toshiya Okada, Souhei Uchida, Kazuhiro Nakata
Direct Joining of Aluminum Alloy and Plastic Sheets by Friction Lap Processing
Materials Science Forum
794-796(2014),395-400.
250 L.Zhou, K.Nakata, T.Tsumura, H.Fujii, K.Ikeuchi, Y.Michishita, Y.Fujiya, M.Morimoto
Microstructure and Mechanical Properties of 316L Stainless Steel Filling Friction Stir-welded Joints
Journal of Materials Engineering and Performance,
23(2014)3718-3726
251 K.Nagatsuka, Y.Sechi, N.Ma, K.Nakata
Simulation of Cracking Phenomena during Laser Brazing of Ceramics and Cemented Carbide
Science and Technology of Welding and Joining,
19-8(2014),682-688
252 OKABE Takatoshi, TOYODA Shunsuke, GOTO Sota, KATO Yasushi, YASUDA Koichi, NAKATA Kazuhiro
Numerical Analysis of Welding Phenomena in High-Frequency Electric Resistance Welding
Key Engineering Materials,
622-623(2014),525-531.
254 永塚公彬,斧田俊樹,岡田俊哉,中田一博
摩擦重ね接合によるMg添加量の異なる種々のアルミニウム合金/樹脂の直接異材接合
溶接学会論文集,
32-4(2014),235-241.
255 山﨑洋輔,阿部洋平,日置幸男,田中智大,中谷光良,北側彰一,中田一博
揺動レーザを用いた厚板突合せ狭開先多層溶接法の開発
溶接学会論文集,
32-4(2014),258-266.
256 F.C.Liu, K.Nakata, J.Liao, S.Hirota, H.Fukui
Reducing Bubbles in Friction Lap Welded Joint of Magnesium Alloy and Polyamide
Science and Technology of Welding and Joining,
19-7(2014),578-587.
257 Kimiaki Nagatsuka, Shoichiro Yoshida, Atsuki Tsuchiya, Kazuhiro Nakata
Direct Joining of Carbon-fiber-reinforced Plastic to an Aluminum Alloy Using Friction Lap Joining
Composites:Part B,
73(2015),82-88.
258 F.C.Liu, J.Liao, Y.Gao, K.Nakata
Influence of texture on strain localization in stir zone of friction stir welded titanium
Journal of Alloys and Compounds,
626(2015),304-308.
259 K.Ishida, Y.Gao, K.Nagatsuka, M.Takahashi, K.Nakata
Microstructures and Mechanical Properties of Friction Stir Welded Lap Joints of Commercially Pure Titanium and 304 Stainless Steel
Journal of Alloys and Compounds,
630(2015),172-177.
260 Y.Gao, K.Nakata, K.Nagatsuka, F.C.Liu, J.Liao
Interface Microstructural Control by Probe Length Adjustment in Fraction Stir Welding of Titanium and Steel Lap Joint
Materials and Design,
65(2015),17-23.
261 AipingWu, ZhihuaSong, Kazuhiro Nakata, Jinsun Liao, Li Zhou
Interface and Properties of the Friction Stir Welded Joints of Titaniumalloy Ti6Al4V with Aluminum Alloy 6061
Materials and Design,
71(2015),85-92.
262 F.C.Liu,J.Liao, Y.GaoandK.Nakata
Effect of Plasma Electrolytic Oxidation Coating on Joining Metal to Plastic
Science and Technology of Welding and Joining,
20(2015),291-296.
263 川人洋介,上村洋輔,土井雄一郎,水谷正海,西本浩司,川上博士,田中学,藤井英俊,中田一博,片山聖二
ステンレス鋼の高輝度・高出力レーザ溶接時の溶融池内湯流れに及ぼす溶接速度の影響の三次元X線透視その場観察法による解明 溶接学会論文集, 33-1(2015),13-19
論文(PDF)264 K.Ishida,Y.Gao,K.Nagatsuka,M.Takahashi,K.Nakata
Microstructures and mechanical properties of friction stir welded lap joints of commercially pure titanium and 304 stainless
Journal of Alloys and Compounds,
30(2015),172–177
265 永塚公彬,田中宏宜,肖伯律,土谷敦岐,中田一博
摩擦重ね接合によるアルミニウム合金と炭素繊維強化樹脂の異材接合特性に及ぼすシランカップリング処理の影響
溶接学会論文集,
33-4(2015),317-325
267 Y.Gao, K.Nakata, K.Nagatsuka, T.Matsuyama, Y.Shibata, M.Amano
Microstructures and mechanical properties of friction stir welded brass/steel dissimilar lap joints at various welding speeds
Materials and Design,
90(2016),1018-1025
268 Y.Gao,K.Nakata, K.Nagatsuka,Y.Shibata, M.Amano
Optimizing tool diameter for friction stir welded brass/steel lap joint
Journal of Materials Processing Technology,
229(2016),313-321
269 Masaaki Kimura,Masahiro Kusaka,Koichi Kaizu,Kazuhiro Nakata,Kimiaki Nagatsuka
Friction welding technique and joint properties of thin-walled pipe friction-welded joint between type 6063 aluminum alloy and AISI304 austenitic stainless steel
Int J Adv Manuf Technol,
82,(2016),489–499
270 永塚公彬,肖伯律,呉利樹,中田一博,佐伯修平,北本和,岩本善昭
抵抗スポット溶接を応用した金属と炭素繊維強化樹脂の直接異材接合
溶接学会論文集,
4-4(2016),267-273
271 Kimiaki NAGATSUKA,Daiki KITAGAWA,Hiroto YAMAOKA and Kazuhiro Nakata
Friction Lap Joining of Thermoplastic Materials to Carbon Steel
ISIJ International,
56-7(2016),1226–1231
272 秦野雅夫,村井康生,小橋泰三,上野邦香,菅野克紀,中田一博,菅哲男
ステンレス鋼とチタンの異材重ね継手形成に及ぼすレーザブレージング条件の検討
スマートプロセス学会誌,
6-1(2017),33-39
273 三輪剛志,北川大喜,永塚公彬,山岡弘人,伊藤和博,中田一博
摩擦重ね接合によるステンレス鋼と炭素繊維強化熱可塑性樹脂との異材接合
溶接学会論文集,
35-1(2017),29-35
274 Kimiaki Nagatsuka, Bolyu Xiao,Lihui Wu,Kazuhiro Nakata,Shuhei Saeki,Yamato Kitamoto & YoshiakiIwamoto
Resistance spot welding of metal/carbon-fibre-reinforced plastics and applying silane coupling treatment
Science and Technology of Welding and Joining,
(2017),1-6
275 Lihui Wu, Kimiaki Nagatsuka, Kazuhiro Nakata
Direct joining of plastic to copper by friction lap joining
溶接学会論文集
35-2(2017)42s-46s
276 L.H.Wu, K.Nagatsuka, K.Nakata
Direct joining of oxygen-free copper and carbon-fiber-reinforced plastic by friction lap joining
J. Materials Science & Technology
34(2018)192-197
278 松本幸樹、西本明生、石川 武、永塚公彬、伊藤和博、塚本雅裕、中田一博
レーザ溶接によるA6061Al合金とAZ31Mg合金の異材接合
軽金属溶接
57-5(2019),198-206
279 J.W.Choi, Y.Morisada, H.Liu, K.Ushioda, H.Fujii, K.Nagatsuka, K.Nakata
Dissimilar friction stir welding of pure Ti and carbon fiber reinforced plastic, Science and Technology of Welding and Joining, on line
(08 July 2020):
https://doi.org/10.1080/13621718.2020.1788814
280 L.H.Wu, B.L.Xiao, K.Nagatsuka, K.Nakata, Z.Y.Ma
Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment,
Composite Structures
242(2020),112-167.
281 笹部 誠二, 木村 真晃, 中島和之, 川上 巧, 梅田 真一, 榎本 正敏, 菅 泰雄, 中田 一博
ステンレス鋼と純アルミニウムとの摩擦圧接による異種金属接合継手の品質評価方法(1)―丸棒同士の継手の場合―
軽金属溶接
58-12(2020),468-478.
282 笹部 誠二, 木村 真晃, 中島和之, 川上 巧, 梅田 真一, 榎本 正敏, 菅 泰雄, 中田 一博
ステンレス鋼と純アルミニウムとの摩擦圧接による異種金属接合継手の品質評価方法(2)―パイプ同士の継手の場合―
軽金属溶接
59-1(2021),11-17.
論文 JWRI
1 Yoshiaki ARATA, Fukuhisa MATSUDA, Kazuhiro NAKATA
Quench Hardening and Cracking in Electron Beam Weld Metal of Carbon and Low Alloy Hardenable Steels
Trans. JWRI,
1-1 (1972), 39-51.
2 Y.Arata, F.Matsuda, K.Nakata
Additional Note on the Report、Quench Hardening and Cracking in Electron Beam Weld Metal of Carbon and Low alloy Hardenable Steels
Trans. JWRI,
2-1 (1973), 123-124.
3 Y.Arata, F.Matsuda, K.Nakata
Effect of Solidification Rate on Solidification Structure in Weld Metal
Trans. JWRI,
5-1 (1976), 47-52.
4 Y.Arata, F.Matsuda, K.Nakata, I.Sasaki
Solidification Crack Susceptibility of Aluminum Alloy Weld Meals(Report I)
Trans. JWRI,
5-2 (1976), 53-67.
5 Y.Arata, F.Matsuda, K.Nakata, K.Shinozaki
Solidification Crack Susceptibility of Aluminum Alloy Weld Meals(Report II)
Trans. JWRI,
6-1 (1977), 91-104.
6 Y.Arata, F.Matsuda, K.Nakata, K.Shinozaki
Solidification Crack Susceptibility of Aluminum Alloy Weld Meals(Report III)
溶接学会論文集,
5-4(1987),452-457.
7 F.Matsuda, H.Nakagawa, K.Nakata, R.Ayani
Effect of Electromagnetic Stiring on Weld Solidification Structure of Aluminum Alloys(Report I)
Trans. JWRI,
7-1 (1978), 111-127.
8 F.Matsuda, K.Nakata, Y.Miyanaga
Effects of Current Pulsation on Weld Solidification Structure of Aluminum Alloys
Trans. JWRI,
7-2 (1978), 139-141.
9 F.Matsuda, H.Nakagawa,K.Nakata, R.Ayani
Effect of Electromagnetic Stiring on the Weld Solidification Structure of Aluminum Alloys (Report II)
Trans. JWRI,
7-2 (1978), 33-45.
10 F.Matsuda, H.Nakagawa,K.Nakata, H.Okada
The VDR Cracking Test for Solidification Crack Susceptibility on Weld Metals and Its Application to Aluminum Alloys
Trans. JWRI,
8-1 (1979), 85-95.
11 F.Matsuda, M.Ushio,K.Nakata, Y.Edo
Weldability of Molybdenum and Its Alloy Sheet (Report I)
Trans. JWRI,
8-2 (1979), 57-69.
12 F.Matsuda, M.Ushio,K.Nakata, Y.Edo
Weldability of Molybdenum and Its Alloy Sheet (Report II)
Trans. JWRI,
9-1 (1980), 69-78.
13 K.Nakata, Y.Miyanaga,F.Matsuda, K.Tsukamoto, K.Arai
New Al-7%Mg Welding Electrode for Crack free Welding of Al-Zn-Mg(7NO1) High Strength Aluminum Alloy
Trans. JWRI,
9-2 (1980), 63-74.
14 F.Matsuda, K.Nakata, S.Harada
Moving Characteristics of Weld Edges during Solidification in Relation to Solidification Cracking in GTA Weld of Aluminum Alloy Thin Sheet
Trans. JWRI,
9-2 (1980), 83-93.
15 F.Matsuda, K.Nakata,K.Arai, K.Tsukamoto
Comparison of Weld Crack Susceptibility of Recent Aluminum Alloys
Trans. JWRI,
10-1 (1981), 71-79.
16 F.Matsuda, K.Nakata,K.Arai, K.Tsukamoto
Assessment of Solidification Cracking Test for Aluminum Alloy Welds
Trans. JWRI,
11-1 (1982), 67-77.
17 Fukuhisa MATSUDA,Kazuhiro NAKATA
A New Self-Restrained Solidification Crack Susceptibility Test for Electron-Beam Welding of Aluminum Alloys
Trans. JWRI,
11-1 (1982), 141-143.
18 F.Matsuda, K.Nakata
A New Test Specimen for Self-Restraint Solidification Crack Susceptibility Test of Electron-Beam Welding Bead-Fan-Shaped Cracking Test-
Trans. JWRI,
11-2 (1982), 87-94.
19 F.Matsuda, H.Nakagawa,K.Nakata, K.Tohmoto, Y.Honda
Quantitativen Evaluation of Solidification Brittleness of Weld Metal during Solidification by Means of In-Situ Observation and Measurement(Report I)
Trans. JWRI,
12-1 (1983), 65-72.
20 F.Matsuda, K.Nakata, Y.Shimokusu, K.Tsukamoto
Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy(Report I)
Trans. JWRI,
12-1 (1983), 81-87.
21 F.Matsuda, K.Nakata, K.Tohmoto
Surface Hardening of Copper-Nickel Alloys with Boronizing
Trans. JWRI,
12-1 (1983), 97-104.
22 F.Matsuda, K.Nakata,K.Tsukamoto, K.Arai
Effect of Addirional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy(ReportII)
Trans. JWRI,
12-2 (1983), 93-102.
23 F.Matsuda, K.Nakata, K.Tohmoto
Ion Nitriding Hardening of Non ferrous Alloys
Trans. JWRI,
12-2 (1983), 111-116.
24 F.Matsuda, K.Nakata,K.Tsukamoto, T.Uchiyama
Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy(Report III)
Trans. JWRI,
13-1 (1984), 57-66.
25 F.Matsuda, K.Nakata, K.Tohmoto, M.Morikawa
Surface Hardening of Gold with Boronizing Technique
Trans. JWRI,
13-1 (1984), 67-75.
26 F.Matsuda, K.Nakata, Y.Mondokoro
Effect of Rhenium and Niobium on Weld Metal Ductility of Molybdenum by EB Welding
Trans. JWRI,
13-2 (1984), 83-89.
27 F.Matsuda, K.Nakata, K.Tohmoto
Surface Hardening of Various Metals and Alloys with Boronizing Technique
Trans. JWRI,
13-2 (1984), 123-129.
28 F.Matsuda, K.Nakata
Weld Defect in Electron-Beam Welds of Powder-Metallurgy Chromium Plate
Trans. JWRI,
13-2 (1984), 181-184.
29 F.Matsuda, K.Nakata, S.Shono
Ion-Nitriding after Welding Improves SCC(Stress Corrosion Cracking)Resistance of Stainless Steel Weldments
Trans. JWRI,
13-2 (1984), 357-359.
30 F.Matsuda, K.Nakata, M.Morikawa
Surface Hardening of Silver Alloy with Boronzing Technique
Trans. JWRI,
14-1 (1985), 55-61.
31 Fukuhisa MATSUDA, Masao USHIO,Hiroji NAKAGAWA, Kazuhiro NAKATA
Hydrogen Embrittlement of SUS 316 Austenitic Stainless Steel Weldments
Trans. JWRI,
14-1 (1985), 63-67.
32 F.Matsuda, K.Nakata, K.Tsukamoto, S.Johgan
Combined Effect of Current Pulsation and Zr Addirion on Improvement of Solidification Cracking of Al-Zn-Mg Alloy Weld Metal
Trans. JWRI,
14-2 (1985), 99-104.
33 F.Matsuda, K.Nakata, N.Sano
Effect of Electromagnetic Stirring on Weld Solidification Structure of Austenitic Stainless Steels
Trans. JWRI,
15-2 (1987), 155-166.
34 F.Matsuda, K.Nakata, T.Makishi
Rapid Plasma Nitriding Process by Means of Hollow Cathode Glow Discharge
Trans. JWRI,
16-1 (1987), 139-144.
35 F.Matsuda, K.Nakata, Y.Nishio
Surface Hardening of Ni-base Alloys with Boronizing Technique
Trans. JWRI,
16-1 (1987), 145-157.
36 F.Matsuda, K.Nakata, T.Makishi
Surface Hardening of Ni Alloys by Means of Plasma Ion Nitriding Process(Report I)
Trans. JWRI,
16-2 (1987), 65-71.
37 F.Matsuda, K.Nakata, T.Makishi, S.Kiya
Surface Hardening of Ni Alloys by Means of Plasma Ion Nitriding Process(Report II)
Trans. JWRI,
17-2 (1988), 127-136
38 F.Matsuda, K.Nakata
Formation of Aluminum-Boride Dispersed Hardened layer on Aluminum Plate Surface by Laser Alloying with Boron Powder
Trans. JWRI,
17-2 (1988), 177-179.
39 F.Matsuda, K.Nakata, T.Otsubo
Plasma Chemical Vapor Deposition of TiB2
Trans. JWRI,
19-1 (1990), 119-126.
40 F.Matsuda, K.Nakata, S.Shimizu, K.Nagai
Carbide Addition on Aluminum Alloy Surface by Plasma Transferred Arc Welding Process
Trans. JWRI,
19-2 (1990), 81-87
41 F.Matsuda, K.Nakata, K.C.Lee, Y.H.Lee
Formation of Thicker Hard Alloy Layer on surface of Aluminum alloy by PTA Overlaying with Metal Powder
Trans. JWRI,
20-1 (1991), 77-89.
42 F.Matsuda, K.Nakata, T.Makishi, S.Kiya
Corrosion Behavior of Tentative Nickel Binary and Ternary Alloys after Plasma Ion Nitriding Treatment
Trans. JWRI,
21-1 (1992), 77-83.
43 F.Matsuda, K.Nakata, S.D.Park, T.Hashimoto
Improvement of Wear Resistance of Aluminum Alloy Surface by Forming Si Alloyed Layer wih PTA Process
Trans. JWRI,
22-1 (1993), 21-29.
44 Masao Ushio, Kazuhiro Nakata, Manabu Tanaka, Hongjun Tong and Tsuneo Mita
Fume Generation in Al-Mg Alloy Welding with AC-pulsed GMA Welding Method
Transactions of JWRI,
23-1 (1994), 21-26.
45 Masao Ushio, Kazuhiro Nakata, Manabu TANAKA and Hideharu Tatedori
Observations of Cathode Spot Movement in AC-GTA Welding of Aluminum Alloy
Trans. JWRI,
23-2 (1994), 169-174.
46 K.Nakata, F.Matsuda
Evaluations of Ductility Characteristics and Cracking Susceptibility of Al Alloys during Welding
Trans. JWRI,
24-1 (1995), 83-94.
47 Kazuhiro NAKATA, Kenji TOMOTO, Fukuhisa MATSUDA
Laser Boronizing of Copper Alloy
Trans. JWRI,
25-1 (1996), 37-41.
48 K.NAKATA, H.NAGAKURA, Y.HONDA, S.TOMIDA
Laser Cladding of TiC Dispersed Ni-Cr Composite Layer on Carbon Steel
Trans. JWRI,
26-2 (1997), 91-93.
49 Kazuhiro NAKATA, Kazuhiko KAWAMURA, Tomoya KITADA, Katsumi KANBE, Masao USHIO
Plasma Carburizing of Tungsten
Trans. JWRI,
27-2 (1998), 27-30.
50 S.Majumder, K.Nakata, M.Ushio
Plasma Nitriding Behavior on Surface Hardening of Copper-Contained High Tensile Steel
Trans. JWRI,
28-1 (1999), 9-14.
51 K.Nakata, T.Hashimoto
Surface Hardening Technology for Aluminum Alloy by Plasma Arc Alloying Process
Trans. JWRI,
29-1 (2000), 1-8.
52 K.Nakata, Y.G.Kim, M.Ushio, T.Hashimoto, S.Jogan
Friction Stir Welding of 6061 Metal-Matrix Composite
Trans. JWRI,
29-2 (2000), 97-99.
53 NAKATA Kazuhiro, KIM Young Gon, USHIO Masao
Friction Stir Welding of Mg-Al-Zn Alloys
Trans. JWRI,
31-2 (2003), 141-145.
54 NAKATA Kazuhiro
New Materials Need the Help of New Joining Technology
Trans. JWRI,
32-1 (2003), 19-24.
55 Taichi Murakami, Kazuhiro Nakata, Hongjun Tong and Masao Ushio
Dissimilar Metal Joining of Steel to Aluminum by Lap Joint MIG Arc Brazing
Transactions of JWRI,
32-1 (2003), 35-37.
56 Masatsugu Fujie, Kazuhiro Nakata, Hongjun Tong and Masao Ushio
MIG Arc Welding of Magnesium Alloy
Transactions of JWRI,
32-1 (2003), 39-40.
57 Young Gon Kim, Kazuhiro Nakata, Taichi Murakami, Toru Komazaki and Masao Ushio
Effect of Tool Plunging Downforce on Friction Stir Welding of ADC12 Die Cast Alloy
Transactions of JWRI,
32-1 (2003), 41-42.
58 Hwa-Soon Park, Takahiro Kimura, Kazuhiro Nakata, Yoshitaka Nagano and Masao Ushio
Friction Stir Welding of Copper and Copper Alloys
Transactions of JWRI,
32-1 (2003), 43-46.
59 Susumu Uozato, kazuhiro Nakata, Masao Ushio
Feasibility Study of Ferrous Powder Thermal Spray Coatings on Cylinder Bores in diesel Engines
Trans. JWRI,
32-2 (2003), 363-364
60 Kazuhiro NAKATA, Yasuo IRISHIKA, Masao USHIO
Nd:YAG Laser Weldability of Al-Cu-Si-Mg High Srength Al Alloy
Trans. JWRI,
33-1(2004), 1-4.
61 Tomoyuki Ueyama, Toshio Ohnawa, Manabu Tanaka, Kazuhiro Nakata
High-Speed Welding of Steel Sheets by the Tandem Pulsed Gas Metal Arc Welding System
Transactions of JWRI,
34-1 (2005), 11-18.
62 Hidetoshi Fujii, Rintaro Ueji, Ling Cui, Kazuhiro Nakata and Kiyoshi Nogi
Friction Stir Welding of Ultrafine Grained IF and Carbon Steels Transaction of JWRI,
35-1 (2006), 47-52.
Trans.JWRI,
35-1 (2006), 53-56.
64 TASHIRO Shinichi, TANAKA Manabu and NAKATA Kazuhiro
Heat Source Properties of Helium Gas Tungsten Arc with Metal Vapor
Trans. JWRI,
36-1 (2007), 7-12.
65 MURAKAMI Kazumi, MAEDA Naoki, KANEMATSU Hideyuki and NAKATA Kazuhiro
Effect of Concrete Rebar Joint Arrangement on Weldability of Hot-dip Galvanized Rebar by Shielded Metal Arc Welding
Trans. JWRI,
36-1 (2007), 13-19.
66 YAMAMOTO Kentaro, TANAKA Manabu, TASHIRO Shinichi, NAKATA Kazuhiro and MURPHY A. B
Numerical Simulation of Metal Vapor Behavior in Argon TIG Welding
Trans. JWRI,
36-2 (2007), 1-4.
67 CHUNG Young Dong, FUJII Hidetoshi, NAKATA Kazuhiro and NOGI Kiyoshi
Friction Stir Welding of High Carbon Tool Steel (SK85) below Eutectoid Temperature
Trans. JWRI,
38-1 (2009), 37-41.
68 TERAJIMA Takeshi, TAKEUCHI Fumiya, NAKATA Kazuhiro, ADACHI Shinichiro, NAKASHIMA Koji and IGARASHI Takanori
Tribological Properties of WC/12Co Cermet - Fe-based Metallic Glass Spray Coating
Trans. JWRI,
38-1 (2009), 75-79.
69 TANAKA Manabu, WAKI Kenji, TASHIRO Shinichi, NAKATA Kazuhiro, YAMAMOTO Eri, YAMAZAKI Kei and SUZUKI Keiich
Visualizations of 2D Temperature Distribution of Molten Metal in Arc Welding Process
Trans. JWRI,
38-2 (2009), 1-4.
70 SUN Yufeng, FUJII Hidetoshi, TAKADA Yutaka, TSUJI Nobuhiro, NAKATA Kazuhiro and NOGI Kiyoshi
Microstructure and Hardness Distribution of Friction Stir Welded 1050 Al and IF Steel with Different Original Grain Size
Trans. JWRI,
38-2 (2009), 43-48.
71 Minhyo Shin, Kazuhiro Nakata
Weld Bead Formation by 10 kW Class High Power Fiber Laser on a 16 mm Thickness Carbon Steel Plat
Trans. JWRI,
39-1 (2010), 33-38.
72 Takahiro Murakami, Minhyo Shin and Kazuhiro Nakata
Effect of Welding Direction on Weld Bead Formation in High Power Fiber Laser and MAG Arc Hybrid Welding
Trans. JWRI,
39-2 (2010), 175-177.
73 Hiroshi Sawato, Shinichi Tashiro, Kazuhiro Nakata, Manabu Tanaka, Eri Yamamoto, Kei Yamazaki and Keiichi Suzuki
Measurement of Dynamical Variation in Two-dimensional Temperature Distribution of TIG Pulsed-Arcs
Trans. JWRI,
39-2 (2010), 193-194.
74 Takuya Tsumura, Hideo Nakajima and Kazuhiro Nakata
Numerical Simulation of Fusion Zone Shape of Lotus-type Porous Metals Produced by Laser Welding
Trans. JWRI,
39-2 (2010), 213-214.
75 Yuichi Setsuhara and Kazuhiro Nakata
Materials Joining Technologies and Interface Science for Integration of Novel Structured Metallic and Inorganic Materials
Trans. JWRI,
39-2 (2010), 259-261.
76 Yoshihisa Sechi and Kazuhiro Nakata
Dissimilar Laser Brazing of Single Crystal Diamond and Tungsten Carbide
Trans. JWRI,
39-2 (2010), 340-342.
77 TSUMURA Takuya, HAMADA Shinsuke, KIMURA Hisamichi, INOUE Akihisa and NAKATA Kazuhiro
Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam
Trans. JWRI,
40-2 (2011), 45-48.
78 GAO Yefei, TSUMURA Takuya, NAKATA Kazuhiro
Dissimilar Welding of Titanium Alloys to Steels
Trans. JWRI,
41-2 (2012), 7-12.